// Aesthetics

public $green_open = "\033[32m";

public $red_open = "\033[31m";

public $yellow_open = "\033[33m";

public $color_close = "\033[0m";

/**

public function status( $args, $assoc_args ) {

if ( ! Jetpack::is_active() ) {

WP_CLI::error( __( 'Jetpack is not currently connected to WordPress.com', 'jetpack' ) );

}

if ( isset( $args[0] ) && 'full' !== $args[0] ) {

WP_CLI::error( sprintf( __( '%s is not a valid command.', 'jetpack' ), $args[0] ) );

}

/*

$all_data = ( isset( $args[0] ) && 'full' == $args[0] ) ? 'full' : false;

if ( $all_data ) {

WP_CLI::success( __( 'Jetpack is currently connected to WordPress.com', 'jetpack' ) );

WP_CLI::line( sprintf( __( "The Jetpack Version is %s", 'jetpack' ), JETPACK__VERSION ) );

WP_CLI::line( sprintf( __( "The WordPress.com blog_id is %d", 'jetpack' ), Jetpack_Options::get_option( 'id' ) ) );

// Heartbeat data

WP_CLI::line( "\n" . __( 'Additional data: ', 'jetpack' ) );

// Get the filtered heartbeat data.

// Filtered so we can color/list by severity

$stats = Jetpack::jetpack_check_heartbeat_data();

// Display red flags first

foreach ( $stats['bad'] as $stat => $value ) {

printf( "$this->red_open%-'.16s %s $this->color_close\n", $stat, $value );

}

// Display caution warnings next

foreach ( $stats['caution'] as $stat => $value ) {

printf( "$this->yellow_open%-'.16s %s $this->color_close\n", $stat, $value );

}

// The rest of the results are good!

foreach ( $stats['good'] as $stat => $value ) {

// Modules should get special spacing for aestetics

if ( strpos( $stat, 'odule-' ) ) {

printf( "%-'.30s %s\n", $stat, $value );

usleep( 4000 ); // For dramatic effect lolz

continue;

}

printf( "%-'.16s %s\n", $stat, $value );

usleep( 4000 ); // For dramatic effect lolz

}

} else {

// Just the basics

WP_CLI::success( __( 'Jetpack is currently connected to WordPress.com', 'jetpack' ) );

WP_CLI::line( sprintf( __( 'The Jetpack Version is %s', 'jetpack' ), JETPACK__VERSION ) );

WP_CLI::line( sprintf( __( 'The WordPress.com blog_id is %d', 'jetpack' ), Jetpack_Options::get_option( 'id' ) ) );

WP_CLI::line( "\n" . _x( "View full status with 'wp jetpack status full'", '"wp jetpack status full" is a command - do not translate', 'jetpack' ) );

}

}

/**

public function disconnect( $args, $assoc_args ) {

if ( ! Jetpack::is_active() ) {

WP_CLI::error( __( 'You cannot disconnect, without having first connected.', 'jetpack' ) );

}

$action = isset( $args[0] ) ? $args[0] : 'prompt';

if ( ! in_array( $action, array( 'blog', 'user', 'prompt' ) ) ) {

WP_CLI::error( sprintf( __( '%s is not a valid command.', 'jetpack' ), $action ) );

}

if ( in_array( $action, array( 'user' ) ) ) {

if ( isset( $args[1] ) ) {

$user_id = $args[1];

if ( ctype_digit( $user_id ) ) {

$field = 'id';

$user_id = (int) $user_id;

} elseif ( is_email( $user_id ) ) {

$field = 'email';

$user_id = sanitize_user( $user_id, true );

} else {

$field = 'login';

$user_id = sanitize_user( $user_id, true );

}

if ( ! $user = get_user_by( $field, $user_id ) ) {

WP_CLI::error( __( 'Please specify a valid user.', 'jetpack' ) );

}

} else {

WP_CLI::error( __( 'Please specify a user by either ID, username, or email.', 'jetpack' ) );

}

}

switch ( $action ) {

case 'blog':

Jetpack::log( 'disconnect' );

Jetpack::disconnect();

WP_CLI::success( __( 'Jetpack has been successfully disconnected.', 'jetpack' ) );

break;

case 'user':

if ( Jetpack::unlink_user( $user->ID ) ) {

Jetpack::log( 'unlink', $user->ID );

WP_CLI::success( sprintf( __( '%s has been successfully disconnected.', 'jetpack' ), $action ) );

} else {

WP_CLI::error( sprintf( __( '%s could not be disconnected. Are you sure they\'re connected currently?', 'jetpack' ), "{$user->login} <{$user->email}>" ) );

}

break;

case 'prompt':

WP_CLI::error( __( 'Please specify if you would like to disconnect a blog or user.', 'jetpack' ) );

break;

}

}

/**

public function reset( $args, $assoc_args ) {

$action = isset( $args[0] ) ? $args[0] : 'prompt';

if ( ! in_array( $action, array( 'options', 'modules' ) ) ) {

WP_CLI::error( sprintf( __( '%s is not a valid command.', 'jetpack' ), $action ) );

}

// Are you sure?

jetpack_cli_are_you_sure();

switch ( $action ) {

case 'options':

$options_to_reset = Jetpack::get_jetpack_options_for_reset();

// Reset the Jetpack options

_e( "Resetting Jetpack Options...\n", "jetpack" );

sleep(1); // Take a breath

foreach ( $options_to_reset['jp_options'] as $option_to_reset ) {

Jetpack_Options::delete_option( $option_to_reset );

usleep( 100000 );

WP_CLI::success( sprintf( __( '%s option reset', 'jetpack' ), $option_to_reset ) );

}

// Reset the WP options

_e( "Resetting the jetpack options stored in wp_options...\n", "jetpack" );

usleep( 500000 ); // Take a breath

foreach ( $options_to_reset['wp_options'] as $option_to_reset ) {

delete_option( $option_to_reset );

usleep( 100000 );

WP_CLI::success( sprintf( __( '%s option reset', 'jetpack' ), $option_to_reset ) );

}

// Reset to default modules

_e( "Resetting default modules...\n", "jetpack" );

usleep( 500000 ); // Take a breath

$default_modules = Jetpack::get_default_modules();

Jetpack::update_active_modules( $default_modules );

WP_CLI::success( __( 'Modules reset to default.', 'jetpack' ) );

// Jumpstart option is special

Jetpack_Options::update_option( 'jumpstart', 'new_connection' );

WP_CLI::success( __( 'jumpstart option reset', 'jetpack' ) );

break;

case 'modules':

$default_modules = Jetpack::get_default_modules();

Jetpack::update_active_modules( $default_modules );

WP_CLI::success( __( 'Modules reset to default.', 'jetpack' ) );

break;

case 'prompt':

WP_CLI::error( __( 'Please specify if you would like to reset your options, or modules', 'jetpack' ) );

break;

}

}

/**

public function module( $args, $assoc_args ) {

$action = isset( $args[0] ) ? $args[0] : 'list';

if ( ! in_array( $action, array( 'list', 'activate', 'deactivate', 'toggle' ) ) ) {

WP_CLI::error( sprintf( __( '%s is not a valid command.', 'jetpack' ), $action ) );

}

if ( in_array( $action, array( 'activate', 'deactivate', 'toggle' ) ) ) {

if ( isset( $args[1] ) ) {

$module_slug = $args[1];

if ( 'all' !== $module_slug && ! Jetpack::is_module( $module_slug ) ) {

WP_CLI::error( sprintf( __( '%s is not a valid module.', 'jetpack' ), $module_slug ) );

}

if ( 'toggle' == $action ) {

$action = Jetpack::is_module_active( $module_slug ) ? 'deactivate' : 'activate';

}

// Bulk actions

if ( 'all' == $args[1] ) {

$action = ( 'deactivate' == $action ) ? 'deactivate_all' : 'activate_all';

}

// VaultPress needs to be handled elsewhere.

if ( in_array( $action, array( 'activate', 'deactivate', 'toggle' ) ) && 'vaultpress' == $args[1] ) {

WP_CLI::error( sprintf( _x( 'Please visit %s to configure your VaultPress subscription.', '%s is a website', 'jetpack' ), esc_url( 'https://vaultpress.com/jetpack/' ) ) );

}

} else {

WP_CLI::line( __( 'Please specify a valid module.', 'jetpack' ) );

$action = 'list';

}

}

switch ( $action ) {

case 'list':

WP_CLI::line( __( 'Available Modules:', 'jetpack' ) );

$modules = Jetpack::get_available_modules();

sort( $modules );

foreach( $modules as $module_slug ) {

if ( 'vaultpress' == $module_slug ) {

continue;

}

$active = Jetpack::is_module_active( $module_slug ) ? __( 'Active', 'jetpack' ) : __( 'Inactive', 'jetpack' );

WP_CLI::line( "\t" . str_pad( $module_slug, 24 ) . $active );

}

break;

case 'activate':

$module = Jetpack::get_module( $module_slug );

Jetpack::log( 'activate', $module_slug );

Jetpack::activate_module( $module_slug, false, false );

WP_CLI::success( sprintf( __( '%s has been activated.', 'jetpack' ), $module['name'] ) );

break;

case 'activate_all':

$modules = Jetpack::get_available_modules();

Jetpack::update_active_modules( $modules );

WP_CLI::success( __( 'All modules activated!', 'jetpack' ) );

break;

case 'deactivate':

$module = Jetpack::get_module( $module_slug );

Jetpack::log( 'deactivate', $module_slug );

Jetpack::deactivate_module( $module_slug );

WP_CLI::success( sprintf( __( '%s has been deactivated.', 'jetpack' ), $module['name'] ) );

break;

case 'deactivate_all':

Jetpack::delete_active_modules();

WP_CLI::success( __( 'All modules deactivated!', 'jetpack' ) );

break;

case 'toggle':

// Will never happen, should have been handled above and changed to activate or deactivate.

break;

}

}

/**

public function protect( $args, $assoc_args ) {

$action = isset( $args[0] ) ? $args[0] : 'prompt';

if ( ! in_array( $action, array( 'whitelist' ) ) ) {

WP_CLI::error( sprintf( __( '%s is not a valid command.', 'jetpack' ), $action ) );

}

// Check if module is active

if ( ! Jetpack::is_module_active( __FUNCTION__ ) ) {

WP_CLI::error( sprintf( _x( '%s is not active. You can activate it with "wp jetpack module activate %s"', '"wp jetpack module activate" is a command - do not translate', 'jetpack' ), __FUNCTION__, __FUNCTION__ ) );

}

if ( in_array( $action, array( 'whitelist' ) ) ) {

if ( isset( $args[1] ) ) {

$action = 'whitelist';

} else {

$action = 'prompt';

}

}

switch ( $action ) {

case 'whitelist':

$whitelist = array();

$new_ip = $args[1];

$current_whitelist = get_site_option( 'jetpack_protect_whitelist' );

// Build array of IPs that are already whitelisted.

// Re-build manually instead of using jetpack_protect_format_whitelist() so we can easily get

// low & high range params for jetpack_protect_ip_address_is_in_range();

foreach( $current_whitelist as $whitelisted ) {

// IP ranges

if ( $whitelisted->range ) {

// Is it already whitelisted?

if ( jetpack_protect_ip_address_is_in_range( $new_ip, $whitelisted->range_low, $whitelisted->range_high ) ) {

WP_CLI::error( sprintf( __( "%s has already been whitelisted", 'jetpack' ), $new_ip ) );

break;

}

$whitelist[] = $whitelisted->range_low . " - " . $whitelisted->range_high;

} else { // Individual IPs

// Check if the IP is already whitelisted (single IP only)

if ( $new_ip == $whitelisted->ip_address ) {

WP_CLI::error( sprintf( __( "%s has already been whitelisted", 'jetpack' ), $new_ip ) );

break;

}

$whitelist[] = $whitelisted->ip_address;

}

}

/*

if ( isset( $args[1] ) && 'list' == $args[1] ) {

if ( ! empty( $whitelist ) ) {

WP_CLI::success( __( 'Here are your whitelisted IPs:', 'jetpack' ) );

foreach ( $whitelist as $ip ) {

WP_CLI::line( "\t" . str_pad( $ip, 24 ) ) ;

}

} else {

WP_CLI::line( __( 'Whitelist is empty.', "jetpack" ) ) ;

}

break;

}

/*

if ( isset( $args[1] ) && 'clear' == $args[1] ) {

if ( ! empty( $whitelist ) ) {

$whitelist = array();

jetpack_protect_save_whitelist( $whitelist );

WP_CLI::success( __( 'Cleared all whitelisted IPs', 'jetpack' ) );

} else {

WP_CLI::line( __( 'Whitelist is empty.', "jetpack" ) ) ;

}

break;

}

// Append new IP to whitelist array

array_push( $whitelist, $new_ip );

// Save whitelist if there are no errors

$result = jetpack_protect_save_whitelist( $whitelist );

if ( is_wp_error( $result ) ) {

WP_CLI::error( __( $result, 'jetpack' ) );

}

WP_CLI::success( sprintf( __( '%s has been whitelisted.', 'jetpack' ), $new_ip ) );

break;

case 'prompt':

WP_CLI::error(

__( 'No command found.', 'jetpack' ) . "\n" .

__( 'Please enter the IP address you want to whitelist.', 'jetpack' ) . "\n" .

_x( 'You can save a range of IPs {low_range}-{high_range}. No spaces allowed. (example: 1.1.1.1-2.2.2.2)', 'Instructions on how to whitelist IP ranges - low_range/high_range should be translated.', 'jetpack' ) . "\n" .

_x( "You can also 'list' or 'clear' the whitelist.", "'list' and 'clear' are commands and should not be translated", 'jetpack' ) . "\n"

);

break;

}

}

/**

public function options( $args, $assoc_args ) {

$action = isset( $args[0] ) ? $args[0] : 'list';

$safe_to_modify = Jetpack::get_jetpack_options_for_reset();

// Jumpstart is special

array_push( $safe_to_modify, 'jumpstart' );

// Is the option flagged as unsafe?

$flagged = ! in_array( $args[1], $safe_to_modify );

if ( ! in_array( $action, array( 'list', 'get', 'delete', 'update' ) ) ) {

WP_CLI::error( sprintf( __( '%s is not a valid command.', 'jetpack' ), $action ) );

}

if ( isset( $args[0] ) ) {

if ( 'get' == $args[0] && isset( $args[1] ) ) {

$action = 'get';

} else if ( 'delete' == $args[0] && isset( $args[1] ) ) {

$action = 'delete';

} else if ( 'update' == $args[0] && isset( $args[1] ) ) {

$action = 'update';

} else {

$action = 'list';

}

}

// Bail if the option isn't found

$option = isset( $args[1] ) ? Jetpack_Options::get_option( $args[1] ) : false;

if ( isset( $args[1] ) && ! $option && 'update' !== $args[0] ) {

WP_CLI::error( __( 'Option not found or is empty. Use "list" to list option names', 'jetpack' ) );

}

// Let's print_r the option if it's an array

// Used in the 'get' and 'list' actions

$option = is_array( $option ) ? print_r( $option ) : $option;

switch ( $action ) {

case 'get':

WP_CLI::success( "\t" . $option );

break;

case 'delete':

jetpack_cli_are_you_sure( $flagged );

Jetpack_Options::delete_option( $args[1] );

WP_CLI::success( sprintf( __( 'Deleted option: %s', 'jetpack' ), $args[1] ) );

break;

case 'update':

jetpack_cli_are_you_sure( $flagged );

// Updating arrays would get pretty tricky...

$value = Jetpack_Options::get_option( $args[1] );

if ( $value && is_array( $value ) ) {

WP_CLI::error( __( 'Sorry, no updating arrays at this time', 'jetpack' ) );

}

Jetpack_Options::update_option( $args[1], $args[2] );

WP_CLI::success( sprintf( _x( 'Updated option: %s to "%s"', 'Updating an option from "this" to "that".', 'jetpack' ), $args[1], $args[2] ) );

break;

case 'list':

$options_compact = Jetpack_Options::get_option_names();

$options_non_compact = Jetpack_Options::get_option_names( 'non_compact' );

$options_private = Jetpack_Options::get_option_names( 'private' );

$options = array_merge( $options_compact, $options_non_compact, $options_private );

// Table headers

WP_CLI::line( "\t" . str_pad( __( 'Option', 'jetpack' ), 30 ) . __( 'Value', 'jetpack' ) );

// List out the options and their values

// Tell them if the value is empty or not

// Tell them if it's an array

foreach ( $options as $option ) {

$value = Jetpack_Options::get_option( $option );

if ( ! $value ) {

WP_CLI::line( "\t" . str_pad( $option, 30 ) . 'Empty' );

continue;

}

if ( ! is_array( $value ) ) {

WP_CLI::line( "\t" . str_pad( $option, 30 ) . $value );

} else if ( is_array( $value ) ) {

WP_CLI::line( "\t" . str_pad( $option, 30 ) . 'Array - Use "get <option>" to read option array.' );

}

}

$option_text = '{' . _x( 'option', 'a variable command that a user can write, provided in the printed instructions', 'jetpack' ) . '}';

$value_text = '{' . _x( 'value', 'the value that they want to update the option to', 'jetpack' ) . '}';

WP_CLI::success(

_x( "Above are your options. You may 'get', 'delete', and 'update' them.", "'get', 'delete', and 'update' are commands - do not translate.", 'jetpack' ) . "\n" .

str_pad( 'wp jetpack options get', 26 ) . $option_text . "\n" .

str_pad( 'wp jetpack options delete', 26 ) . $option_text . "\n" .

str_pad( 'wp jetpack options update', 26 ) . "$option_text $value_text" . "\n" .

_x( "Type 'wp jetpack options' for more info.", "'wp jetpack options' is a command - do not translate.", 'jetpack' ) . "\n"

);

break;

}

}

/**

public function sync( $args, $assoc_args ) {

if ( ! Jetpack_Sync_Actions::sync_allowed() ) {

WP_CLI::error( __( 'Jetpack sync is not currently allowed for this site.', 'jetpack' ) );

}

$action = isset( $args[0] ) ? $args[0] : 'status';

switch ( $action ) {

case 'status':

$status = Jetpack_Sync_Actions::get_sync_status();

$collection = array();

foreach ( $status as $key => $item ) {

$collection[] = array(

'option' => $key,

'value' => is_scalar( $item ) ? $item : json_encode( $item )

);

}

WP_CLI\Utils\format_items( 'table', $collection, array( 'option', 'value' ) );

break;

case 'start':

// Get the original settings so that we can restore them later

$original_settings = Jetpack_Sync_Settings::get_settings();

// Initialize sync settigns so we can sync as quickly as possible

$sync_settings = wp_parse_args(

array_intersect_key( $assoc_args, Jetpack_Sync_Settings::$valid_settings ),

array(

'sync_wait_time' => 0,

'enqueue_wait_time' => 0,

'queue_max_writes_sec' => 10000,

'max_queue_size_full_sync' => 100000

)

);

Jetpack_Sync_Settings::update_settings( $sync_settings );

// Convert comma-delimited string of modules to an array

if ( ! empty( $assoc_args['modules'] ) ) {

$modules = array_map( 'trim', explode( ',', $assoc_args['modules'] ) );

// Convert the array so that the keys are the module name and the value is true to indicate

// that we want to sync the module

$modules = array_map( '__return_true', array_flip( $modules ) );

}

foreach ( array( 'posts', 'comments', 'users' ) as $module_name ) {

if (

'users' === $module_name &&

isset( $assoc_args[ $module_name ] ) &&

'initial' === $assoc_args[ $module_name ]

) {

$modules[ 'users' ] = 'initial';

} elseif ( isset( $assoc_args[ $module_name ] ) ) {

$ids = explode( ',', $assoc_args[ $module_name ] );

if ( count( $ids ) > 0 ) {

$modules[ $module_name ] = $ids;

}

}

}

if ( empty( $modules ) ) {

$modules = null;

}

// Kick off a full sync

if ( Jetpack_Sync_Actions::do_full_sync( $modules ) ) {

if ( $modules ) {

WP_CLI::log( sprintf( __( 'Initialized a new full sync with modules: ', 'jetpack' ), join( ', ', $modules ) ) );

} else {

WP_CLI::log( __( 'Initialized a new full sync', 'jetpack' ) );

}

} else {

// Reset sync settings to original.

Jetpack_Sync_Settings::update_settings( $original_settings );

if ( $modules ) {

WP_CLI::error( sprintf( __( 'Could not start a new full sync with modules: %s', 'jetpack' ), join( ', ', $modules ) ) );

} else {

WP_CLI::error( __( 'Could not start a new full sync', 'jetpack' ) );

}

}

// Keep sending to WPCOM until there's nothing to send

$i = 1;

do {

$result = Jetpack_Sync_Actions::$sender->do_full_sync();

if ( $result ) {

if ( 1 == $i++ ) {

WP_CLI::log( __( 'Sent data to WordPress.com', 'jetpack' ) );

} else {

WP_CLI::log( __( 'Sent more data to WordPress.com', 'jetpack' ) );

}

}

} while ( $result );

// Reset sync settings to original.

Jetpack_Sync_Settings::update_settings( $original_settings );

WP_CLI::success( __( 'Finished syncing to WordPress.com', 'jetpack' ) );

break;

}

}

/**

public function sync_queue( $args, $assoc_args ) {

if ( ! Jetpack_Sync_Actions::sync_allowed() ) {

WP_CLI::error( __( 'Jetpack sync is not currently allowed for this site.', 'jetpack' ) );

}

$queue_name = isset( $args[0] ) ? $args[0] : 'sync';

$action = isset( $args[1] ) ? $args[1] : 'peek';

// We map the queue name that way we can support more friendly queue names in the commands, but still use

// the queue name that the code expects.

$queue_name_map = $allowed_queues = array(

'incremental' => 'sync',

'full' => 'full_sync',

);

$mapped_queue_name = isset( $queue_name_map[ $queue_name ] ) ? $queue_name_map[ $queue_name ] : $queue_name;

switch( $action ) {

case 'peek':

require_once JETPACK__PLUGIN_DIR . 'sync/class.jetpack-sync-queue.php';

$queue = new Jetpack_Sync_Queue( $mapped_queue_name );

$items = $queue->peek( 100 );

if ( empty( $items ) ) {

WP_CLI::log( sprintf( __( 'Nothing is in the %s queue', 'jetpack' ), $queue_name ) );

} else {

$collection = array();

foreach ( $items as $item ) {

$collection[] = array(

'action' => $item[0],

'args' => json_encode( $item[1] ),

'current_user_id' => $item[2],

'microtime' => $item[3],

'importing' => (string) $item[4],

);

}

WP_CLI\Utils\format_items(

'table',

$collection,

array(

'action',

'args',

'current_user_id',

'microtime',

'importing',

)

);

}

break;

}

}

$cli = new Jetpack_CLI();

// Default cancellation message

if ( ! $error_msg ) {

$error_msg =

__( 'Action cancelled. Have a question?', 'jetpack' )

. ' '

. $cli->green_open

. 'jetpack.com/support'

. $cli->color_close;

}

if ( ! $flagged ) {

$prompt_message = __( 'Are you sure? This cannot be undone. Type "yes" to continue:', '"yes" is a command. Do not translate that.', 'jetpack' );

} else {

/* translators: Don't translate the word yes here. */

$prompt_message = __( 'Are you sure? Modifying this option may disrupt your Jetpack connection. Type "yes" to continue.', 'jetpack' );

}

WP_CLI::line( $prompt_message );

$handle = fopen( "php://stdin", "r" );

$line = fgets( $handle );

if ( 'yes' != trim( $line ) ){

WP_CLI::error( $error_msg );

}

}